Osram EASY PB Coupler Manual do Utilizador descarregar pdf (Página 2)

Page 2 of 2

Operation (cont.)

Pure sequence mode operation

Short or long press: The corresponding sequence is started or

stopped.

T 1...4 Start sequence mode with sequence A..D

T 5 All luminaires: change brightness manually/switch

on and off

T 6 Resume paused sequence

T 7 Pause running sequence

T 8 Call up the next lighting scene

Light scenes and sequence mode operation

T 1...4 Store and call up lighting scenes 1...4

T 5 All luminaires: change brightness manually/switch

on and off

T 6 Start sequence mode with sequence A/resume

paused sequence

T 7 Pause running sequence

T 8 Call up the next lighting scene

Operation via switches or motion detector

Lighting scene operation

Close switch contact:

lighting scenes 1...15 are called up (depending on the DIP

switch setting).

Open switch contact:

lighting scene 16 is called up (default setting: all luminaires off).

For the unit to function effectively, only one of the contacts on

inputs T1 to T8 may be switched at any one time.

Push-

button

T 1...7 Store and call up ligh-

ting scenes 1...7

Store and call up ligh-

ting scenes 9...15

T 8 Call up lighting scene 8 –

Sequence mode operation

Close switch contact:

sequence A..D is started

Open switch contact:

lighting scene 16 is called up (default setting: all luminaires off).

Push-

button

T 1...4 Start sequence mode with sequence A..D

T 5...8 –

Appendix

Technical data

Outputs EASY signal, 4-pin, SELV

• Max. 50 m line length to the next

control unit

• Max. 100 m total line length

Inputs 8 inputs for potential-free closer

contacts,max. 25 m line length at one

input,max. 50 m total line length over

all inputs

Leads diameter 0.25 …1.5 mm²

Operating tempe-

rature

0 °C …+ 50 °C

Protection type IP 20

Protection class III

Dimensions

(L x W x H)

47 x 44 x 13 mm

LED message Communication: LED ashes

The CE requirements are fullled: EMC requirements as per

EN 61547, low voltage as per EN 60928.

Conformity with the relevant EU directives is

conrmed by the CE symbol.

1 2

Comentários a estes Manuais

Sem comentários

Osram EASY PB Coupler Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Iluminação Osram EASY PB Coupler